always-on LIVE Streaming to Website
by tt on Nov.03, 2008, under TenM3
TenM3 service makes it very simple to add LIVE streaming to your website as shown below.
With a Panasonic camera or Camcorder at location (and then setup on the TenM3), adding a LIVE stream is just pasting a small widget code on your website. The whole process takes a few minutes.
On the website, a very large number of people can watch the LIVE stream concurrently. The LIVE stream can also be recorded online and Shared with others. Other than the camera, NO equipment is needed at the location.
click to See
The steps to setup LIVE streaming are -
1. open a TenM3 account
2. select a camera and get it
3. Setup camera on your network and then at TenM3 - How to use TenM3
4. make the Feed public
5. mouse-over the Feed again, click on Share, copy the LIVE stream’s widget code (below the snapshot)
6. paste the widget code on your website
Tip: Make sure the Camera’s username / password for the Feed is alphanumeric only and no special characters are used.
Other helpful tips are at TenM3 Help.
If you plan to use a Camcorder for always-on streaming, make sure the Camcorder can stay always-on and does not power-down.
TenM3 - Add Vision Everywhere!
Leave a Reply
You must be logged in to post a comment.
November 10th, 2008 on 2:12 am
[...] To add your local LIVE weather to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
November 14th, 2008 on 2:08 am
[...] To add your local LIVE weather to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
November 14th, 2008 on 5:41 am
[...] To add your local LIVE weather to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
November 17th, 2008 on 12:36 am
[...] To add a LIVE-feed to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
November 18th, 2008 on 6:00 am
[...] To add a LIVE-feed to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
November 18th, 2008 on 5:51 pm
[...] To add your local LIVE weather to your website, follow the steps listed here http://www.tenm3.com:8081/blogs/?p=172 [...]
December 10th, 2008 on 6:12 pm
[...] http://www.tenm3.com/blogs/?p=172 [...]